des算法的c语言实现
㈠ 用c语言实现DES算法
LZ。。。幻想啥呢。一般大家就算做过，也不会在这里因为80分就把算法给你。
再说了，没做过的，更不可能因为80分给你做一个。。。
还是去图书馆吧...这个。。。
㈡ 基于C语言的DES加密算法的实现 要怎么写啊
首先c语言要熟悉，然后去图书馆借一本加密解密的书，要里面有c语言des实现代码的（这种书是有的，我看到过）。论文先对加密解密的历史及发展现状进行介绍，然后着重对des加密的发展历史及原理进行阐述（以上内容要多借几本相关书综合一下用自己的语言表达出来）。然后对des的算法写个程序（可以利用书里面的程序），然后运行结果截几张图下来。最后总结一下，论文就可以了。
㈢ 如何用C语言实现DES
，要里面有c语言des实现代码的（这种书是有的，我看到过）。论文先对加密解密的历史及发展现状进行介绍，然后着重对des加密的发展历史及原理进行阐述（以上内容要多借几本相关书综合一下用自己的语言表达出来）。然后对des的算法写个程序（可以利用书里面的程序），然后运行结果截几张图下来。最后总结一下，论文就可以了。
另外,站长团上有产品团购,便宜有保证
㈣ 用c实现des算法!!!
/* d3des.h -
*
* Headers and defines for d3des.c
* Graven Imagery, 1992.
*
* Copyright (c) 1988,1989,1990,1991,1992 by Richard Outerbridge
* (GEnie : OUTER; CIS : [71755,204])
*/
#define D2_DES /* include double-length support */
#define D3_DES /* include triple-length support */
#ifdef D3_DES
#ifndef D2_DES
#define D2_DES /* D2_DES is needed for D3_DES */
#endif
#endif
#define EN0 0 /* MODE == encrypt */
#define DE1 1 /* MODE == decrypt */
/* A useful alias on 68000-ish machines, but NOT USED HERE. */
typedef union {
unsigned long blok[2];
unsigned short word[4];
unsigned char byte[8];
} M68K;
extern void deskey(unsigned char *, short);
/* hexkey[8] MODE
* Sets the internal key register according to the hexadecimal
* key contained in the 8 bytes of hexkey, according to the DES,
* for encryption or decryption according to MODE.
*/
extern void usekey(unsigned long *);
/* cookedkey[32]
* Loads the internal key register with the data in cookedkey.
*/
extern void cpkey(unsigned long *);
/* cookedkey[32]
* Copies the contents of the internal key register into the storage
* located at &cookedkey[0].
*/
extern void des(unsigned char *, unsigned char *);
/* from[8] to[8]
* Encrypts/Decrypts (according to the key currently loaded in the
* internal key register) one block of eight bytes at address 'from'
* into the block at address 'to'. They can be the same.
*/
#ifdef D2_DES
#define desDkey(a,b) des2key((a),(b))
extern void des2key(unsigned char *, short);
/* hexkey[16] MODE
* Sets the internal key registerS according to the hexadecimal
* keyS contained in the 16 bytes of hexkey, according to the DES,
* for DOUBLE encryption or decryption according to MODE.
* NOTE: this clobbers all three key registers!
*/
extern void Ddes(unsigned char *, unsigned char *);
/* from[8] to[8]
* Encrypts/Decrypts (according to the keyS currently loaded in the
* internal key registerS) one block of eight bytes at address 'from'
* into the block at address 'to'. They can be the same.
*/
extern void D2des(unsigned char *, unsigned char *);
/* from[16] to[16]
* Encrypts/Decrypts (according to the keyS currently loaded in the
* internal key registerS) one block of SIXTEEN bytes at address 'from'
* into the block at address 'to'. They can be the same.
*/
extern void makekey(char *, unsigned char *);
/* *password, single-length key[8]
* With a double-length default key, this routine hashes a NULL-terminated
* string into an eight-byte random-looking key, suitable for use with the
* deskey() routine.
*/
#define makeDkey(a,b) make2key((a),(b))
extern void make2key(char *, unsigned char *);
/* *password, double-length key[16]
* With a double-length default key, this routine hashes a NULL-terminated
* string into a sixteen-byte random-looking key, suitable for use with the
* des2key() routine.
*/
#ifndef D3_DES /* D2_DES only */
#define useDkey(a) use2key((a))
#define cpDkey(a) cp2key((a))
extern void use2key(unsigned long *);
/* cookedkey[64]
* Loads the internal key registerS with the data in cookedkey.
* NOTE: this clobbers all three key registers!
*/
extern void cp2key(unsigned long *);
/* cookedkey[64]
* Copies the contents of the internal key registerS into the storage
* located at &cookedkey[0].
*/
#else /* D3_DES too */
#define useDkey(a) use3key((a))
#define cpDkey(a) cp3key((a))
extern void des3key(unsigned char *, short);
/* hexkey[24] MODE
* Sets the internal key registerS according to the hexadecimal
* keyS contained in the 24 bytes of hexkey, according to the DES,
* for DOUBLE encryption or decryption according to MODE.
*/
extern void use3key(unsigned long *);
/* cookedkey[96]
* Loads the 3 internal key registerS with the data in cookedkey.
*/
extern void cp3key(unsigned long *);
/* cookedkey[96]
* Copies the contents of the 3 internal key registerS into the storage
* located at &cookedkey[0].
*/
extern void make3key(char *, unsigned char *);
/* *password, triple-length key[24]
* With a triple-length default key, this routine hashes a NULL-terminated
* string into a twenty-four-byte random-looking key, suitable for use with
* the des3key() routine.
*/
#endif /* D3_DES */
#endif /* D2_DES */
㈤ 用C语言实现DES加密算法！
l iceEncryptText 文本加密解密
http://dl.icese.net/src.php?f=iceEncryptText.src.rar
㈥ C语言实现DES算法中各种矩阵变换
首先说下：楼主有找到DES算法了吗？还是打算自己写？是这样的？大家一般都是使用开源回的答OPNSSL，这个是好东西啊，里边包含了全世界知名的加密算法，而且是免费的。里边就有你说点这些小方法。只要下载源码，自己编译，就能有自己的所有加密源码了。
㈦ 用C语言实现DES，RSA算法，给100分
发给你了一个对文本文件简单des加密的源码，不是自己写的，从开源中国下载的（^_^为开源中国做下广告，应该可以抵消我利用其中的源码换积分的罪过吧^_^）
㈧ 请问如何用C语言（或C++）实现高效率的DES算法
开源的复有很制多啦，比如这个
http://www.ka9q.net/code/des/
汇编版和C语言版都有
㈨ 用C语言来实现DES加密算法（很急）两天内
DES虽然不难但是挺繁复的，代码如下，关键点都有英文解释，仔细看。各个函数的功能都可以从函数名看出来。
#include "pch.h"
#include "misc.h"
#include "des.h"
NAMESPACE_BEGIN(CryptoPP)
/* Tables defined in the Data Encryption Standard documents
* Three of these tables, the initial permutation, the final
* permutation and the expansion operator, are regular enough that
* for speed, we hard-code them. They're here for reference only.
* Also, the S and P boxes are used by a separate program, gensp.c,
* to build the combined SP box, Spbox[]. They're also here just
* for reference.
*/
#ifdef notdef
/* initial permutation IP */
static byte ip[] = {
58, 50, 42, 34, 26, 18, 10, 2,
60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6,
64, 56, 48, 40, 32, 24, 16, 8,
57, 49, 41, 33, 25, 17, 9, 1,
59, 51, 43, 35, 27, 19, 11, 3,
61, 53, 45, 37, 29, 21, 13, 5,
63, 55, 47, 39, 31, 23, 15, 7
};
/* final permutation IP^-1 */
static byte fp[] = {
40, 8, 48, 16, 56, 24, 64, 32,
39, 7, 47, 15, 55, 23, 63, 31,
38, 6, 46, 14, 54, 22, 62, 30,
37, 5, 45, 13, 53, 21, 61, 29,
36, 4, 44, 12, 52, 20, 60, 28,
35, 3, 43, 11, 51, 19, 59, 27,
34, 2, 42, 10, 50, 18, 58, 26,
33, 1, 41, 9, 49, 17, 57, 25
};
/* expansion operation matrix */
static byte ei[] = {
32, 1, 2, 3, 4, 5,
4, 5, 6, 7, 8, 9,
8, 9, 10, 11, 12, 13,
12, 13, 14, 15, 16, 17,
16, 17, 18, 19, 20, 21,
20, 21, 22, 23, 24, 25,
24, 25, 26, 27, 28, 29,
28, 29, 30, 31, 32, 1
};
/* The (in)famous S-boxes */
static byte sbox[8][64] = {
/* S1 */
14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7,
0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8,
4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0,
15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13,
/* S2 */
15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10,
3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5,
0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15,
13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9,
/* S3 */
10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8,
13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1,
13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7,
1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12,
/* S4 */
7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15,
13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9,
10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4,
3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14,
/* S5 */
2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9,
14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6,
4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14,
11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3,
/* S6 */
12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11,
10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8,
9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6,
4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13,
/* S7 */
4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1,
13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6,
1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2,
6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12,
/* S8 */
13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7,
1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2,
7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8,
2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11
};
/* 32-bit permutation function P used on the output of the S-boxes */
static byte p32i[] = {
16, 7, 20, 21,
29, 12, 28, 17,
1, 15, 23, 26,
5, 18, 31, 10,
2, 8, 24, 14,
32, 27, 3, 9,
19, 13, 30, 6,
22, 11, 4, 25
};
#endif
/* permuted choice table (key) */
static const byte pc1[] = {
57, 49, 41, 33, 25, 17, 9,
1, 58, 50, 42, 34, 26, 18,
10, 2, 59, 51, 43, 35, 27,
19, 11, 3, 60, 52, 44, 36,
63, 55, 47, 39, 31, 23, 15,
7, 62, 54, 46, 38, 30, 22,
14, 6, 61, 53, 45, 37, 29,
21, 13, 5, 28, 20, 12, 4
};
/* number left rotations of pc1 */
static const byte totrot[] = {
1,2,4,6,8,10,12,14,15,17,19,21,23,25,27,28
};
/* permuted choice key (table) */
static const byte pc2[] = {
14, 17, 11, 24, 1, 5,
3, 28, 15, 6, 21, 10,
23, 19, 12, 4, 26, 8,
16, 7, 27, 20, 13, 2,
41, 52, 31, 37, 47, 55,
30, 40, 51, 45, 33, 48,
44, 49, 39, 56, 34, 53,
46, 42, 50, 36, 29, 32
};
/* End of DES-defined tables */
/* bit 0 is left-most in byte */
static const int bytebit[] = {
0200,0100,040,020,010,04,02,01
};
/* Set key (initialize key schele array) */
DES::DES(const byte *key, CipherDir dir)
: k(32)
{
SecByteBlock buffer(56+56+8);
byte *const pc1m=buffer; /* place to modify pc1 into */
byte *const pcr=pc1m+56; /* place to rotate pc1 into */
byte *const ks=pcr+56;
register int i,j,l;
int m;
for (j=0; j<56; j++) { /* convert pc1 to bits of key */
l=pc1[j]-1; /* integer bit location */
m = l & 07; /* find bit */
pc1m[j]=(key[l>>3] & /* find which key byte l is in */
bytebit[m]) /* and which bit of that byte */
? 1 : 0; /* and store 1-bit result */
}
for (i=0; i<16; i++) { /* key chunk for each iteration */
memset(ks,0,8); /* Clear key schele */
for (j=0; j<56; j++) /* rotate pc1 the right amount */
pcr[j] = pc1m[(l=j+totrot[i])<(j<28? 28 : 56) ? l: l-28];
/* rotate left and right halves independently */
for (j=0; j<48; j++){ /* select bits indivially */
/* check bit that goes to ks[j] */
if (pcr[pc2[j]-1]){
/* mask it in if it's there */
l= j % 6;
ks[j/6] |= bytebit[l] >> 2;
}
}
/* Now convert to odd/even interleaved form for use in F */
k[2*i] = ((word32)ks[0] << 24)
| ((word32)ks[2] << 16)
| ((word32)ks[4] << 8)
| ((word32)ks[6]);
k[2*i+1] = ((word32)ks[1] << 24)
| ((word32)ks[3] << 16)
| ((word32)ks[5] << 8)
| ((word32)ks[7]);
}
if (dir==DECRYPTION) // reverse key schele order
for (i=0; i<16; i+=2)
{
std::swap(k[i], k[32-2-i]);
std::swap(k[i+1], k[32-1-i]);
}
}
/* End of C code common to both versions */
/* C code only in portable version */
// Richard Outerbridge's initial permutation algorithm
/*
inline void IPERM(word32 &left, word32 &right)
{
word32 work;
work = ((left >> 4) ^ right) & 0x0f0f0f0f;
right ^= work;
left ^= work << 4;
work = ((left >> 16) ^ right) & 0xffff;
right ^= work;
left ^= work << 16;
work = ((right >> 2) ^ left) & 0x33333333;
left ^= work;
right ^= (work << 2);
work = ((right >> 8) ^ left) & 0xff00ff;
left ^= work;
right ^= (work << 8);
right = rotl(right, 1);
work = (left ^ right) & 0xaaaaaaaa;
left ^= work;
right ^= work;
left = rotl(left, 1);
}
inline void FPERM(word32 &left, word32 &right)
{
word32 work;
right = rotr(right, 1);
work = (left ^ right) & 0xaaaaaaaa;
left ^= work;
right ^= work;
left = rotr(left, 1);
work = ((left >> 8) ^ right) & 0xff00ff;
right ^= work;
left ^= work << 8;
work = ((left >> 2) ^ right) & 0x33333333;
right ^= work;
left ^= work << 2;
work = ((right >> 16) ^ left) & 0xffff;
left ^= work;
right ^= work << 16;
work = ((right >> 4) ^ left) & 0x0f0f0f0f;
left ^= work;
right ^= work << 4;
}
*/
// Wei Dai's modification to Richard Outerbridge's initial permutation
// algorithm, this one is faster if you have access to rotate instructions
// (like in MSVC)
inline void IPERM(word32 &left, word32 &right)
{
word32 work;
right = rotl(right, 4U);
work = (left ^ right) & 0xf0f0f0f0;
left ^= work;
right = rotr(right^work, 20U);
work = (left ^ right) & 0xffff0000;
left ^= work;
right = rotr(right^work, 18U);
work = (left ^ right) & 0x33333333;
left ^= work;
right = rotr(right^work, 6U);
work = (left ^ right) & 0x00ff00ff;
left ^= work;
right = rotl(right^work, 9U);
work = (left ^ right) & 0xaaaaaaaa;
left = rotl(left^work, 1U);
right ^= work;
}
inline void FPERM(word32 &left, word32 &right)
{
word32 work;
right = rotr(right, 1U);
work = (left ^ right) & 0xaaaaaaaa;
right ^= work;
left = rotr(left^work, 9U);
work = (left ^ right) & 0x00ff00ff;
right ^= work;
left = rotl(left^work, 6U);
work = (left ^ right) & 0x33333333;
right ^= work;
left = rotl(left^work, 18U);
work = (left ^ right) & 0xffff0000;
right ^= work;
left = rotl(left^work, 20U);
work = (left ^ right) & 0xf0f0f0f0;
right ^= work;
left = rotr(left^work, 4U);
}
// Encrypt or decrypt a block of data in ECB mode
void DES::ProcessBlock(const byte *inBlock, byte * outBlock) const
{
word32 l,r,work;
#ifdef IS_LITTLE_ENDIAN
l = byteReverse(*(word32 *)inBlock);
r = byteReverse(*(word32 *)(inBlock+4));
#else
l = *(word32 *)inBlock;
r = *(word32 *)(inBlock+4);
#endif
IPERM(l,r);
const word32 *kptr=k;
for (unsigned i=0; i<8; i++)
{
work = rotr(r, 4U) ^ kptr[4*i+0];
l ^= Spbox[6][(work) & 0x3f]
^ Spbox[4][(work >> 8) & 0x3f]
^ Spbox[2][(work >> 16) & 0x3f]
^ Spbox[0][(work >> 24) & 0x3f];
work = r ^ kptr[4*i+1];
l ^= Spbox[7][(work) & 0x3f]
^ Spbox[5][(work >> 8) & 0x3f]
^ Spbox[3][(work >> 16) & 0x3f]
^ Spbox[1][(work >> 24) & 0x3f];
work = rotr(l, 4U) ^ kptr[4*i+2];
r ^= Spbox[6][(work) & 0x3f]
^ Spbox[4][(work >> 8) & 0x3f]
^ Spbox[2][(work >> 16) & 0x3f]
^ Spbox[0][(work >> 24) & 0x3f];
work = l ^ kptr[4*i+3];
r ^= Spbox[7][(work) & 0x3f]
^ Spbox[5][(work >> 8) & 0x3f]
^ Spbox[3][(work >> 16) & 0x3f]
^ Spbox[1][(work >> 24) & 0x3f];
}
FPERM(l,r);
#ifdef IS_LITTLE_ENDIAN
*(word32 *)outBlock = byteReverse(r);
*(word32 *)(outBlock+4) = byteReverse(l);
#else
*(word32 *)outBlock = r;
*(word32 *)(outBlock+4) = l;
#endif
}
void DES_EDE_Encryption::ProcessBlock(byte *inoutBlock) const
{
e.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
}
void DES_EDE_Encryption::ProcessBlock(const byte *inBlock, byte *outBlock) const
{
e.ProcessBlock(inBlock, outBlock);
d.ProcessBlock(outBlock);
e.ProcessBlock(outBlock);
}
void DES_EDE_Decryption::ProcessBlock(byte *inoutBlock) const
{
d.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
}
void DES_EDE_Decryption::ProcessBlock(const byte *inBlock, byte *outBlock) const
{
d.ProcessBlock(inBlock, outBlock);
e.ProcessBlock(outBlock);
d.ProcessBlock(outBlock);
}
void TripleDES_Encryption::ProcessBlock(byte *inoutBlock) const
{
e1.ProcessBlock(inoutBlock);
d.ProcessBlock(inoutBlock);
e2.ProcessBlock(inoutBlock);
}
void TripleDES_Encryption::ProcessBlock(const byte *inBlock, byte *outBlock) const
{
e1.ProcessBlock(inBlock, outBlock);
d.ProcessBlock(outBlock);
e2.ProcessBlock(outBlock);
}
void TripleDES_Decryption::ProcessBlock(byte *inoutBlock) const
{
d1.ProcessBlock(inoutBlock);
e.ProcessBlock(inoutBlock);
d2.ProcessBlock(inoutBlock);
}
void TripleDES_Decryption::ProcessBlock(const byte *inBlock, byte *outBlock) const
{
d1.ProcessBlock(inBlock, outBlock);
e.ProcessBlock(outBlock);
d2.ProcessBlock(outBlock);
}
㈩ DES加密算法C语言实现
#include<iostream.h>
class SubKey{ //定义子密钥为一个类
public:
int key[8][6];
}subkey[16]; //定义子密钥对象数组
class DES{
int encipher_decipher; //判断加密还是解密
int key_in[8][8]; //用户原始输入的64位二进制数
int key_out[8][7]; //除去每行的最后一位校验位
int c0_d0[8][7]; //存储经PC-1转换后的56位数据
int c0[4][7],d0[4][7]; //分别存储c0,d0
int text[8][8]; //64位明文
int text_ip[8][8]; //经IP转换过后的明文
int A[4][8],B[4][8]; //A,B分别存储经IP转换过后明文的两部分,便于交换
int temp[8][6]; //存储经扩展置换后的48位二进制值
int temp1[8][6]; //存储和子密钥异或后的结果
int s_result[8][4]; //存储经S变换后的32位值
int text_p[8][4]; //经P置换后的32位结果
int secret_ip[8][8]; //经逆IP转换后的密文
public:
void Key_Putting();
void PC_1();
int function(int,int); //异或
void SubKey_Proction();
void IP_Convert();
void f();
void _IP_Convert();
void Out_secret();
};
void DES::Key_Putting() //得到密钥中对算法有用的56位
{
cout<<"请输入64位的密钥(8行8列且每行都得有奇数个1):\n";
for(int i=0;i<8;i++)
for(int j=0;j<8;j++){
cin>>key_in[i][j];
if(j!=7) key_out[i][j]=key_in[i][j];
}
}
void DES::PC_1() //PC-1置换函数
{
int pc_1[8][7]={ //PC-1
{57, 49, 41, 33, 25, 17, 9},
{1, 58, 50, 42, 34, 26, 18},
{10, 2, 59, 51, 43, 35, 27},
{19, 11, 3, 60, 52, 44, 36},
{63, 55, 47, 39, 31, 23, 15},
{7, 62, 54, 46, 38, 30, 22},
{14, 6, 61, 53, 45, 37, 29},
{21, 13, 5, 28, 20, 12, 4}
};
int i,j;
for(i=0;i<8;i++)
for(j=0;j<7;j++)
c0_d0[i][j]=key_out[ (pc_1[i][j]-1)/8 ][ (pc_1[i][j]-1)%8 ];
}
int DES::function(int a,int b) //模拟二进制数的异或运算,a和b为整型的0和1,返回值为整型的0或1
{
if(a!=b)return 1;
else return 0;
}
void DES::SubKey_Proction() //生成子密钥
{
int move[16][2]={ //循环左移的位数
1 , 1 , 2 , 1 ,
3 , 2 , 4 , 2 ,
5 , 2 , 6 , 2 ,
7 , 2 , 8 , 2 ,
9 , 1, 10 , 2,
11 , 2, 12 , 2,
13 , 2, 14 , 2,
15 , 2, 16 , 1
};
int pc_2[8][6]={ //PC-2
14, 17 ,11 ,24 , 1 , 5,
3 ,28 ,15 , 6 ,21 ,10,
23, 19, 12, 4, 26, 8,
16, 7, 27, 20 ,13 , 2,
41, 52, 31, 37, 47, 55,
30, 40, 51, 45, 33, 48,
44, 49, 39, 56, 34, 53,
46, 42, 50, 36, 29, 32
};
for(int i=0;i<16;i++) //生成子密钥
{
int j,k;
int a[2],b[2];
int bb[28],cc[28];
for(j=0;j<4;j++)
for(k=0;k<7;k++)
c0[j][k]=c0_d0[j][k];
for(j=4;j<8;j++)
for(k=0;k<7;k++)
d0[j-4][k]=c0_d0[j][k];
for(j=0;j<4;j++)
for(k=0;k<7;k++){
bb[7*j+k]=c0[j][k];
cc[7*j+k]=d0[j][k];
}
for(j=0;j<move[i][1];j++){
a[j]=bb[j];
b[j]=cc[j];
}
for(j=0;j<28-move[i][1];j++){
bb[j]=bb[j+1];
cc[j]=cc[j+1];
}
for(j=0;j<move[i][1];j++){
bb[27-j]=a[j];
cc[27-j]=b[j];
}
for(j=0;j<28;j++){
c0[j/7][j%7]=bb[j];
d0[j/7][j%7]=cc[j];
}
for(j=0;j<4;j++) //L123--L128是把c0,d0合并成c0_d0
for(k=0;k<7;k++)
c0_d0[j][k]=c0[j][k];
for(j=4;j<8;j++)
for(k=0;k<7;k++)
c0_d0[j][k]=d0[j-4][k];
for(j=0;j<8;j++) //对Ci,Di进行PC-2置换
for(k=0;k<6;k++)
subkey[i].key[j][k]=c0_d0[ (pc_2[j][k]-1)/7 ][ (pc_2[j][k]-1)%7 ];
}
}
void DES::IP_Convert()
{
int IP[8][8]={ //初始置换IP矩阵
58, 50, 42, 34, 26, 18, 10, 2,
60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6,
64, 56, 48, 40, 32, 24, 16, 8,
57, 49, 41, 33, 25, 17, 9, 1,
59, 51, 43, 35, 27, 19, 11, 3,
61, 53, 45, 37, 29, 21, 13, 5,
63, 55, 47, 39, 31, 23, 15, 7
};
cout<<"你好,你要加密还是解密?加密请按1号键(输入1),解密请按2号键,并确定."<<'\n';
cin>>encipher_decipher;
char * s;
if(encipher_decipher==1) s="明文";
else s="密文";
cout<<"请输入64位"<<s<<"(二进制):\n";
int i,j;
for(i=0;i<8;i++)
for(j=0;j<8;j++)
cin>>text[i][j];
for(i=0;i<8;i++) //进行IP变换
for(j=0;j<8;j++)
text_ip[i][j]=text[ (IP[i][j]-1)/8 ][ (IP[i][j]-1)%8 ];
}